• Stainless steel frame and auger construction
  • Special lighting, pitch and edge designs
  • Loader reach radii > 27 feet
  • Abrasion-resistant infeed and discharge transitions
  • Post, haunch or platform mounting
  • Special control functions, interfaces and enclosure ratings
  • Retractable loading spouts with 2 to 20 feet of vertical travel and dust recovery

DYNATEK’s auger or screw conveyor-based EconoLoader™ features the design versatility required to accommodate loading applications in almost any industry. Carbon or stainless steel construction, special trough designs, special flighting and pitch designs, hardened augers, augers finished with UHMW plastic or wire brush edge treatments and more. It’s this design versatility which enables DYNATEK to create articulated load-out conveyors for almost any powder or uniformly-sized bulk material and we’ve been doing it for years.

Construction: 1st and 2nd conveying arms = carbon steel structural trough housing with 8 – 24 inch diameter augers
Loader Reach: 22 feet from inlet CL to discharge CL typical for truck loading; 27 feet from inlet CL to discharge CL typical for railcar loading
Loading Rate: Up to 7,500 cubic feet / hour (material dependent)
Loader Positioning: Hydraulic or electromechanically driven slew bearings enable each arm to rotate up to 330 degrees horizontally at 180 degrees per minute
Finish: White metal sandblast; Devoe™ Bar-Rust 235™ primer coat; Devoe™ Devthane™ 379UVA Urethane Gloss Enamel finish coat

Fully wired, NEMA 4 control panel with main disconnect, palm button-type emergency stop and wireless, handheld, push-button pendant allows operator to rotate arm 1 and 2, raise and lower a load spout, start / stop conveyor operation and start / stop material supply

Ask Us About

Optional Features

Special Conveyor Designs
Custom Control Panels
Installation & Commissioning Assistance
Wear-Resistant In-Feed and Discharge Chutes

Ask About DYNATEK System Options