• Stainless steel frame and drag chain construction
  • Drag conveyor sizes > 21 inches
  • Loader reach radii > 27 feet
  • Vertical position control of the 2nd conveyor arm
  • Special infeed and discharge transitions
  • Post, haunch or platform mounting
  • Special control functions, interfaces and enclosure ratings
  • Retractable loading spouts with 2 to 20 feet of vertical travel and dust recovery

DYNATEK’s drag conveyor-based EconoLoader™ is preferred for the toughest materials and loading applications. Carbon steel box and structural truss frames, AR-grade steel bottoms and side plates and UHMW flights mounted on heavy duty steel chain results in loaders that are strong, yet versatile enough to handle everything from DDGS to abrasives like fly ash, fertilizer & cement. Drag conveyor-based loaders are also self-cleaning and fully enclosed so conveying is dust-free.

Like all DYNATEK loading systems, drag conveyor-based models are designed for articulated motion. Two slewing gear-based pivots enable both conveyor arms to pivot separately resulting in nearly 330 degrees of rotation and a loader reach of up to 27 feet. Loading is fast and convenient because you position the loader, not the truck, railcar or barge being loaded.

Construction: 1st and 2nd conveyor arms = Carbon steel structural truss frames with AR-grade bottoms and side plates; UHMW flights and heavy-duty steel chain
Loader Reach: 22 feet from inlet CL to discharge CL for truck loading; 27 feet from inlet CL to discharge CL for railcar loading
Loading Rate: 21" wide drag conveyors can load at rates up to 30,000 cu. ft. / hr.
Loader Positioning: Hydraulic or electromechanically-driven slew bearings enable each arm to rotate up to 330 degrees horizontally at 180 degrees per minute
Finish: White metal sandblast; Devoe™ Bar-Rust 235™ primer coat; Devoe™ Devthane™ 379UVA Urethane Gloss Enamel finish coat

Fully wired, NEMA 4 control panel with main disconnect, palm button-type Emergency stop and wireless, handheld push-button pendant allows operator to rotate arm 1 and 2, raise and lower a load spout, start / stop conveyor operation and start / stop material supply

Ask Us About

Optional Features

Special Conveyor Designs
Custom Control Panels
Installation & Commissioning Assistance
Wear-Resistant In-Feed and Discharge Chutes

Ask About DYNATEK System Options